ABC Anchor Clamp with Bracket for Bare Messenger

Category: ABC Fittings

Description ACB50-65 is composed of a conical wedge clamp with base plate, a long U-bolt with nuts, a short U-bolt with nuts, an insulator, a anchor shackle and a mounting bracket. Features UV resistant insulator provides the enough insulation between the messenger and the pole. Installation of the messenger and the conical wedge clamp is easy by hands without any special tool. Mouth of conical wedge clamp has a funnel entry of the messenger wire and in the mean time it is capable to seal out the connection and the messenger wire against ingress of moisture and pollutants. No loosable parts. It can be allocated with a long U-bolt for fine adjustment of the tensioning or sagging of up to 150 mm. Mounting bracket can be mounted on the pole/wall by stainless steel tape or M16 bolts. It can withstand 19kV A.C. for 1 minute at the humidity of 26%. Ultimate tensile strength is not less than 65 kN for 1 minute.

Consult Back

Cat. No.

Bare Messenger *

Cross Section Area (mm²)

Overall Diameter

of the Messenger (mm)

UTS (kN)

Mass

(kg)

ACB50-65

Ø 9.0

3.50