Category
Square Pot Plate for Anchor
Description Made of steel plate for anchoring of 5/8” diameter rods. Application Used for the installation in holes drilled by power diggers or dug with backhoe. Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes on transmission projects. Square pot plate anchors are installed in a diagonal bored hole which is undercut so the anchor is at right angles to the guy. Both anchor and rod trench should be refilled and tamped. Features Rated working load is 16kN. Minimum deformation load is 27 kN. Minimum ultimate tensile strengths is 32kN. Hot dip galvanized to ASTM A153 or EN ISO 1461 or AS 1650. Catalog No. 161